The rear spring’s relation to the front spring and armature bar
is important to the geometry of the frame. These four pieces of
the tattoo machine should be aligned as much as possible to
ensure that optimal energy is transposed. If the alignment is off,
the needle will not enter the bottom of the tube’s tip in a straight
manner, and a lot of energy will be wasted during the mechanical
systems cycle.
Related Articles
-
Voltage Theory
The tattoo process requires power. While it is possible to run a tattoo machine without a proper power supply...
-
Tattoo Multi-meter as a tool
Here is a small clip from the second DVD in the welcome tattoo - apprentice training series. First I...
-
The Dirty Room
Every tattoo studio should have a “dirty” room where biohazardous material is kept and regularly disposed of. In your...
-
How much voltage does my tattoo machine need?
Typically a tattoo machine will run from 4 volts to 12 volts. There is no real rule of thumb...
-
TeachMeToTattoo.com
TeachMeToTattoo.com is a website that is now a community that has tens of thousands of members who help each...
-
Traditional Liner
The traditional liner setup, in my opinion, is a machine that runs really fast, hits hard, and has a...
-
Tattoo Machine Troubleshooting
If you’re having problems with your clip cord and you don’t know what it is, it just doesn't seem...
-
Goal Three
Understanding the energy force behind your machine is the third goal of this text. You will need to learn...
Recent Comments