Tribal Lining ?

[Tommy mitchell]

Well hope everyone is well, Got a ? concerning large tribal pc, I know the usual is to line 1 out then fill. Since anything is possible,
could you just use a large mag since you can use many angles of it to line & fill ? kinda like a realism approach ? & has anyone tried this approach
with what results ? Thanx ;)

[imported_canvasyou]

Usually you do NOT want to line w/ a 1 liner. Its too small. Start w/ a 5 tight or 7 tight while learning.
You can also line w/ a mag but need practice.
Stay away from single needle lining – you will do more damage than good.

[Tommy mitchell]

Totally agree w/ the single needle doing more damage due to less resistance, Only time ive seen one used was on a micro tat (nickel) size.
I wasnt suggesting using a 1 liner, id probably use a 9RL & 11-15 M2 if I were outling it then filling. But instead of this route I
was asking if a M1 or M2 could be used if one had enough practice & experince w that type of needle grouping to do the entire tribal pc ?
I do appreciate your feedback. Other than personal preference which of the two ways what would be the best route ? :)

[imported_canvasyou]

Sorry! misread the post!!
I would use a woven mag not stacked if you plan to outline…
But just outline w/ a round tight is you are still apprentice.

[Author]

Posts