I have the book that came with the kit so i am a little knowledgable about some of it. Mainly i was wondering if the angle of the contact screw was right and spacing between coils and armature bar. Recently i tried to fill in a piece on my leg ,and for the most part the lines went in good a little dotty in some areas ,but stayed in. I tried to add in some color and it looked decent untill i wipe it off and barely any of the actual color stayed. So i was wondering if this is a machine, ink, or technique problem. Or possibly a mixture or all three. For the black i use Intenze and it seems to do fairly well. For the color it was some crappy brand that just says classical tattoo. Also there seems to be alot of spark that comes off the contact screw even at regular voltage. Any and all tips or suggestions would be helpful. Thanx
Recent Comments