poppalung

[poppalung]

without blacklight[attachment=0:2onaocy2]Image0.jpg[/attachment:2onaocy2] some of the flouresent colors are a bitch to work with

[poppalung]

[attachment=0:s6nkjhv2]tatgun2.jpg[/attachment:s6nkjhv2]This is the under side of the spring plate, it had excess plastic around the hole that I had scraped away. The screw that holds the spring to the plate is hollow for the clipcord to go into. I tried placing a small washer on the clipcord :idea: , flat on the bottom of the plate, it helped a little but the machine still cuts out :evil: . I haven’t contacted superior yet, but thats my next step. thanks again…..

[poppalung]

I bought a raven machine from superior, I was very suprised when i opened the box and relized that the frame is PLASTIC!!!! it makes the machine really light but i had problems with it right out of the box! I had to scrape excess plastic from the bottom of the spring plate where the power cord connects, and it still dosent run consistently. It cuts in and out when you move the machine. i was wondering if anyone had any ideas to remedy this problem? i tried putting washers in there to help the flow of electricty, but it didnt help to much. I like the feel and light weight of the machine but am ready to scrap it for parts……….. thanks

[Author]

Posts